Shenzhen Socay Electronics Co., Ltd.
25+ Years Components Supplier. Provide One-stop Service BOM.
Add to Cart
1210 Type SMD Zinc Oxide Varistor SV1210N470G0A SOCAY Original Factory Supply
SMD Zinc Oxide Varistor DATASHEET: SV1210N470G0A_v209.1.pdf
Description:
The SMD Zinc Oxide Varistor SV1210N470G0A is based on Multilayer fabrication technology. These components are designed to suppress a variety of transient events, including those specified in IEC 61000-4-2 or other standards used for Electromagnetic Compliance (EMC). The SV1210N470G0A is typically applied to protect integrated circuits and other components at the circuit board level. It can operate over a wider temperature range than zener diodes.
SMD Zinc Oxide Varistor Electrical Characteristics (25±5℃):
| Symbol | Minimum | Typical | Maximum | Units |
| VRMS | — | — | 37 | V |
| VDC | — | — | 47 | V |
| VV | 56.4 | — | 70.5 | V |
| VC | — | — | 155 | V |
| Imax | — | — | 250 | A |
| Wmax | — | — | 0.8 | J |
VRMS - SMD Zinc Oxide Varistor Maximum AC operating voltage the varistor can maintain and not exceed 10μA leakage current.
VDC - Maximum DC operating voltage the varistor can maintain and not exceed 10μA leakage current.
VV - Voltage across the device measure at 1mA DC current.
Equivalent to VB “breakdown voltage”.
VC - Maximum peak current across the varistor with 8/20μs waveform and 5A pulse current.
Imax - Maximum peak current which may be applied with 8/20μs waveform without device failure.
Wmax - Maximum energy which may be dissipated with the 10/1000μs waveform without device failure.
SMD Zinc Oxide Varistor Features:
|
SMD Zinc Oxide Varistor Applications:
|
SMD Zinc Oxide Varistor Construction & Dimensions:
| Size EIA (EIAJ) | Length (L) | Width (W) | Thickness (T) | |||
| Inches | Millimeters | Inches | Millimeters | Inches | Millimeters | |
| 1210 (3225) | 0.126±0.012 | 3.20±0.30 | 0.098±0.012 | 2.50±0.30 | 0.098 Max | 2.50 Max |
General Technical Data:
| Operating Temperature | -55~125℃ |
| Storage Temperature | -55~150℃ |
| Response Time | <1 ns |
| Solderability | 245±5℃, 3±1sec |
| Solder Leach Resistance | 260±5℃, 10±1sec |
Soldering Recommendations:
|
Quantity of Products in The Taping Package:
| SIZE EIA (EIAJ) | 1210 (3225) |
| Standard Packing Quantity (PCS / reel) | 3,000 |